Separate Type Vortex Gas Flow Meter Transmitter 1.6MPa 2.5MPa - 4.0MPa

Introduction:

    The series of Vortex Flowmeter is based on Von Karman’s Vortex Principle, 

which adopts piezoelectric crystal as testing components. It is a new kind of 

stress detecting vortex flow meter.It has the advantages of wide range rate, 

high accuracy,low pressure loss, good medium generality, pulse signal output 

proportional to flow, convenient to connect with computer etc.As the detector 

probe of sensor and the vortex generating body are installed separately, and the 

high temperature resistant piezoelectric crystal does’t contact with medium, 

so the instrument is of simple structure, good generality, and high stability.

 LUGB series Vortex Flowmeter sensor can be used to detect and measure 

the flow of all kinds of gas, fluid and steam.

LUGB flowmeter sensor can be used to match with our company’s MT6000 

series flow totalizer. It also can match with computers and sensors of temperature, 

pressure, or density to compose high-accuracy mass flow or heat flow detecting 

and measuring system.

Features:

1) Measuring medium: Steam,gas, liquid(Avoid of multiple- direction fluid)

2) Accuracy:Liquid:1.0%  Gas:1.5%

3) Repeatability:Liquid 0.33%  Gas:0.5%

4) Range:Liquid:0.7m/s~7m/s   Gas:7m/s~40m/s

5) Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)

6) Fluid temperature:-40~250(Common type)100~350(High-temperature type)

7) Body material:304 stainless steel(SS316 is optional)

8) Output signal:Pulse(three wires,low level≤1V;High level4V);4~20mA;RS485

9) Power supply:24VDC(12VDC),Lithium battery 

10) Ambient temperature : -35  ~ 60  ( without LCD );  -5~60(with LCD)

Structure
Consist of coverter (with amplifier board),bracket,bluff body
components(Triangular prism,probe) and body,the picture
as below:

Installation
Vortex flow meters have different structures and
installations,maintenance man should know the specific
structure, the convert signal,and all the links during the signal
transmission. In order to make sure the instrument can work
properly,the installation should follow the operated manual.