High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement MTF manufacturer from China Nanjing Metlan Measurement Control Instrument Co., Ltd

High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MTF

High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement</strong

High Accuracy Electromagnetic Fluid Flow Meter Low Conductivity Measurement

Brief technical parameters
Ambient temperature-25---65
Ambient humidity
Medium temperature:-25--80(Note:The temperature is
different for each lining material, please advise when place
order.)
Casing protection level IP65,IP67,IP68
Flow range 0.5 --- 15m/s
Measuring diameter:DN10---DN2400
Electrode material:Standard 316L(other material is optional)
Flange installation:Comply with GB9119,carbon steel(stainless
steel is optional)
Pressure Grade:PN1.0PN1.6PN2.5PN4.0 optional
Accuracy Grade:. Grade,. Grade
Measuring Parameters:instant flow ,instant flow rate
Record parameters : Total flow accumulated, 32 group event
record
Detection and alarm parameters:Pipe empty alarm, Excitation
current detection alarm
Battery capacity detection alarm
Flow curves: Automatically show flow percentage and curves.
Scaled output signal: Unit volume flow pulse

Linging Selection :

Lining material	Main Performance	Applied Scope
PTFE	Have the most stable chemical properties in plastics, and resist boiling hydrochlor and sulfuric acid, nitric acid aqua regia, strong alkali, and all kinds of organic solvents, but can not resist the corrosion of chlorine trifluoride, liquid fluorine, liquid oxygen and ozone. Low abrasion resistance 3.Low negative pressure resistance	1. -25140 2. Strong corrosion medium, like strong acid and alkali. 3.Healthcare medium
CR	Oil proof, solvent resistance, oxidatite resistance and the resist the erosion of common medium like acid, alkali, salt, etc	1.<80 2.be able to measure sewage and mud
PU	Very good abrasive resistance, flexibility 2. Low acid and alkali resistance	1. <65 2. Neutral strong abrasion resistance medium
Hard Rubber	Good resistance to room temperature, hydrochloric acid, acetic acid, oxalic acid, ammonia, phosphoric acid and 50% sulfuric acid, sodium hydroxide, potassium hydroxide Avoid strong oxidants	1.<80 2.General acid, alkali, salt solution
PFA	can be used for most corrosive medium like acids, alkalis, and strong oxidant. 2.high material strength, resistance to aging, better than PTFE,EFP in high temperature Injection molding for higher negative pressure	1.40180 strong corrosion medium, like strong acid and alkali Healthcare medium