Compact Type Electromagnetic Flow Meter with carbon steel flange
 
 
Introduction:
    MTF electromagnetic flow meter, composed of sensor and converter, works based on 

Faraday’s law of  electromagnetic induction. It is used to measure electrical conductivity of 

liquid or solid. Generally, the electrical conductivity should be over 5υS/cm(electrical 

conductivity of tap water, raw water is about 100500υS/cm),It can also be used to measure 

various mediums like acid, alkali, saline solution,paper pulp,ore pulp and so on.But these 

mediums can’t contain a lot of magnetic materials and bubbles.

Application:

MTF electromagnetic flow meter is, a kind of instrument,used for measuring the flow 

conductivity liquid, which is widely used in flow measuring of Metallurgy, Chemical 

industry, Paper industry, Environmental protection, Oil industry, Textile industry, Food 

industry and City administration, Water works,etc.
 
 
Instrument detection and maintenance

Electromagnetic flow converter has self-diagnosis function. In
addition to the power and hardware circuit fault, The system also give
alarm to other faults in general usage. These information are given
accordingly prompts in the lower right of the screen.

1,Maintenance and repair

a) Sensor installation site should be consistent with the section four
requirements, Please keep the housing clean and tidy;
b)Transmitter should be placed in a clean, ventilated, dry place;
c)Need to inspect every two years, for high precision users, instrument
need to be submitted to censorship.

2,Transportation, storage

a)The instrument must be packed before transportation, be carefully
handled when loading and unloading.
b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the
ambient temperature is not too low or too high;
c)Storage time better not exceed three years.

3,Unpacking and checking

a) The packing can’t be opened with heavy hammer, and should be
careful not to damage the instrument
b) Check the content carefully according to the packing list.