SS304 High Temperature Intelligent Vortex Flow Meter Anti Interference

Brief introduction:

Vortex Flowmeter is based on Von Karman’s Vortex Principle, 

which adopts piezoelectric crystal as testing components. It is a new

kind of stress detecting vortex flow meter.It has the advantages of 

wide range rate, high accuracy,low pressure loss, good medium generality, 

pulse signal output proportional to flow, convenient to connect with 

computer etc.As the detector probe of sensor and the vortex generating 

body are installed separately, and the high temperature resistant piezoelectric 

crystal does’t contact with medium, so the instrument is of simple structure, 

good generality, and high stability.

Features:

1) Measuring medium: Steam,gas, liquid(Avoid of multiple- direction fluid)

2) Accuracy:Liquid:1.0%  Gas:1.5%

3) Repeatability:Liquid 0.33%  Gas:0.5%

4) Range:Liquid:0.7m/s~7m/s   Gas:7m/s~40m/s

5) Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)

6) Fluid temperature:-40~250(Common type)100~350(High-temperature type)

7) Body material:304 stainless steel(SS316 is optional)

8) Output signal:Pulse(three wires,low level≤1V;High level4V);4~20mA;RS485

9) Power supply:24VDC(12VDC),Lithium battery 

10) Ambient temperature : -35  ~ 60  ( without LCD );  -5~60(with LCD)

11) Relative humidity:5~95%

12) Protection level:IP65

13) Electrical connection:M20*1.5

14) Explosion-proof:Optional

Application:

It is suitable for oil, chemical industry, metallurgy, heating power, spinning,
papermaking ,etc. Be use of control: over-heating vapor, saturation vapor, compressed air,

ordinary air(oxygen, nitrogen, hydrogen, natural gas, coal gas ,etc), water and liquid

(water, petrol , alcohol, benzene , etc.

Customer Order Information Table