High Performance Insertion Electromagnetic Flow Meter for DN3000 Pipe
 
 
Storage precaution

After the shipment arrival, if the instrument is planed to store for a certain time, the followings
should be paid attention to:
A. It should be packed by its original package and kept same as the shipment package.
B. The storage place should take the following reference:
a. Avoid rain and wind.
b. Avoid impact
c. Don’t open the wire box for sensors connection to keep it dry in order not to affect future
normal operation
d. Atmosphere temperature, humidity and air pressure:
Atmosphere temperature:-20~+60

Atmosphere temperature:-20~+60
Relative humidity:5%~90%
Air pressure:86-106KPa

Installation location precautions

The installation location is chosen according to the following requirements, ensuring the stable
and continuous operation of instruments.
Atmosphere temperature: avoid large temperature change and sunshine, if some thermal radiation
in the installation location, the thermal insulation and ventilation should be applied.
Air condition: avoid strongly corrosion and explosive gas in the installation location
(non-explode-resistant instrument).

Change adapter direction
It is not recommended to change the adapter direction by users, if it is necessary to change, please
contact service center.

Product application scope

The insert-type electromagnetic flow-meter is composed of sensors and adapter, using for
measuring conductive liquid. During measurement, conductivity is required to be more than 5μ
s/cm, and water, sewage, acid and alkali and so on could be measured.

Product component

One set of PMF insert-type electromagnetic flow-meter is composed of sensors and adapter. Two
different types are designed, according to safety class and parameter configuration, which are
sensor and adapter in one unit type and sensor and adapter separate type.
The sensor and adapter connection by shield cable is adopted in the separate type installation, to
make one set of electromagnetic flow-meter, illustrated as follow. The parameters could be fixed
according to user requirement and production value after manufacturing, which is suitable to inner
water occasion.

Packing box