Sanitary / Impacted Type Fluid Flow Meter With Multi Language Interface
 
Introduction:
    MTF electromagnetic flow meter, composed of sensor and converter, works based on Faraday’s law of 
electromagnetic induction. It is used to measure electrical conductivity of liquid or solid. Generally, the 
electrical conductivity should be over 5υS/cm(electrical conductivity of tap water, raw water is about 
100500υS/cm),It can also be used to measure various mediums like acid, alkali, saline solution,paper 
pulp,ore pulp and so on.But these mediums can’t contain a lot of magnetic materials and bubbles.

 
 
Features:
1).It applys “Fuzzy Algorithm” technology to the measurement of electromagnetic and has the function of  artificial intelligence.
2). It,s high resistance, fast response design can make undistorted collection of weak signal and fast 
response to the flow changes. Its range rate can reach 100:1.
3). It has the function of low conductivity measurement.
4). It is the first domestic company that tests full or empty pipe by adopting capacitance technology, which 

can avoid wrong alarms.
5). It has the consistency of converter’s interchange, which can avoid input parameters repeatedly.
6). Wide range of power supply mode is available (DC: 18V-36V/AC: 85V-265V).
7). It is the first domestic company that adopts the function of saving settings before delivery, which can 
avoid the loss of the parameters.
8). It adopts the international leading excitation technology, which circuit is simple, stable, and reliable.

9). It has the function of infrared remote control and button operation so as to make the operation more 
convenient.
10). It provides the function of zero correction of sensor and automatic zero adjustment.
11). It has multi-language interface to satisfy all the users’ requirements.
12). It has the function of self-adjustment and self-checking.
13). A variety of output communication interfaces are optional.HART communication (optional);RS485

 (Modbus is optional) communication interface; Profibus 

(optional)16-figure current loop4~20mA output 0-10kHz frequency output Pulse equivalent output.

Instrument characteristic:

1). No additional flow loss and no jams happen. Especially for measuring the flow of

solid-liquid object.

2). Only liner and electrode have direct contact with the measuring medium, by

choosing correct liner and electrode, then the corrosion resistance and wear

resistance can be satisfied. Therefore it can be used in kinds of strong acid

and alkali in chemical solutions.

3). Easy for installation, 5D for front straight pipe, 2D for back straight pipe(D

means inner diameter of chosen instrument).

4). High accuracy, it is up to ±0.2%,it is capable for testing

5). It provides the function of zero correction of sensor and automatic zero

adjustment.

6). It has multi-language interface to satisfy all the users’ requirements.

7). It has the function of self-adjustment and self-checking.

8). It has lightning-protection and electricity-protection circuits. The effective,

anti-interference circuits apply to all kinds of bad environment.

Photos