Electromagnetic Vortex Flow Meter Integrated Type Explosion Proof

Introduction:

The series of Vortex Flowmeter is based on Von Karman’s Vortex Principle, which 

adopts piezoelectric crystal as testing components. It is a new kind of stress detecting 

vortex flow meter.It has the advantages of wide range rate, high accuracy,low pressure 

loss, good medium generality, pulse signal output proportional to flow, convenient to 

connect with computer etc.As the detector probe of sensor and the vortex generating 

body are installed separately, and the high temperature resistant piezoelectric crystal 

does’t contact with medium, so the instrument is of simple structure, good generality, 

and high stability.

LUGB series Vortex Flowmeter sensor can be used to detect and measure the flow of 

all kinds of gas, fluid and steam.

LUGB flowmeter sensor can be used to match with our company’s MT6000 series flow 

totalizer. It also can match with computers and sensors of temperature, pressure, or 

density to compose high-accuracy mass flow or heat flow detecting and measuring system.

Technical Parameters

Measuring medium: Steam,gas, liquid(Avoid of multiple- direction fluid)

Accuracy:Liquid:1.0% Gas:1.5%

Repeatability:Liquid 0.33% Gas:0.5%

Range:Liquid:0.7m/s~7m/s Gas:7m/s~40m/s

Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)

Fluid temperature:-40~250(Common type)100~

350(High-temperature type)
 
 

Output signal:Pulse(three wires,low level≤1V;High level4V);

4~20mA;RS485

Power supply:24VDC(12VDC),Lithium battery

Ambient temperature : -35 ~ 60 ( without LCD ); -5~60(with LCD)

Relative humidity:5~95%

Protection level:IP65

Electrical connection:M20*1.5

Explosion-proof::Optional

The structure of Vortex flow meter is simple and strong, no movable parts,

and it is very stable.

Simple installation and easy maintenance

Wide measuring rang,the ratio is up to 10:1.
 
 

When measuring the volume of fluid,compensate as required,replace parts

  without re-calibrate the flow meter.
 
 
 
 
 

Notes

Users need to master the following technical parameters
before selecting the type of vortex flow meter:
Liquid description, ingredient, corrosion, abrasion etc

Minimum,normal,maximum working pressure
Minimum,normal,maximum working temperature
Viscosity under working conditions
for gas still need to know the relative humidity
The flow characteristic inside the pipe: steady flow, Variable
flow, pulsating flow, The gas-liquid two-phase flow, The
liquid-liquid two-phase flow etc
Flow status: clean or dirty,
Field environment and installation conditions etc
Explosion-proof requirement of the instrument

 
Customer Order Information Table