High Accuracy Portable Milk Flow Meter Digital Flow Meter RS485

          Overview

          Liquid turbine flow meter consists of two main parts---turbine sensor and display instruments. It has           adopted advanced technology and obtains following characteristics: simple structure, light, high                 accuracy, good repeatability, quick response and easy to install and maintain. Liquid turbine flow                meter is widely applied to measuring liquid in sealed tube; not corrosive with stainless steel                       1Cr18Ni9Ti,2Cr13, corundum Al2O3 and cemented carbide; with no fiber, particle or other                       impurity; kinematic viscosity less than 5 × 10-6m2/s in working temperature. When the kinematic                 viscosity is faster than 5 × 10-6m2/s, needs to calibrate the meter before using. Also it can match               with display instrument with special functions to realize quantitative control, excessive alarm etc. In             all, it is an ideal choice for low conductive liquid.

Product Features
1. High accuracy, usually reach ±1%R,±5%R, or even reach
±0.2%R for high-precision type;
2. Good repeatability, can reach 0.05%-0.2% in short term, if
regular calibration or online calibration can get an extremely
high accuracy,so it is preferred in trade;
4. Pulse signal output,suitable for total flow measurement and
computer connection, no zero drift, strong anti-jamming
capability;
5. High frequency signal(3-4kHz),strong signal resolution;
6. Wide range, middle and big diameter can reach 1:20, and
small diameter can reach 1:10;
7. Compact structure, easy installation and maintenance,
strong flow capacity;

The external environment requirements:
The flow meter is better to be installed indoor. If it must be
installed outdoors,it must be adopt sunscreen, rain and
lightning protection measures, to avoid affect the service life.

Medium containing impurities requirements:
In order to ensure the life of the flowmeter, the filter should
be installed in front of the flow meter straight pipe.

Installation place:
The flowmeter should be installed in place of easily for
maintenance, without strong electromagnetic interference and
thermal radiation.

Installation welding requirements:
Matched flange should be welded to the front and rear pipe.
Welding with flow meter is not allowed! Should strictly clear the
pipeline welding slag and other dirt before installing the flow
meter. Preferably with a diameter pipes (or bypass tube) in
place of the flowmeter to purge the pipeline,to ensure that the
flow meter will be from damage during use. When the
flowmeter is installed,the gasket between the flanges can not
be recessed in pipe.

Grounding requirements:
The flow meter should be grounded

Promise of Metlan
We promise to keep your long interest and offer relative training skills to your all

operational support,and to lead Metlan into your industy.

Transport and store

The sensor should be placed in solid wooden box (small diameter can be in carton box). Free jump in the box is not allowed. Handle with care when carrying. Rough handling is forbidden. The storage place should comply with following conditions:

1. Protect from rain and moisture

2. Free from the effect of mechanical vibration

3. Ambient environment:: -20~+55 ; relative humility: ≤ 80%, without corrosive air

4. Check whether there is damage caused by transportation

Photos