Disposal Industry Electromagnetic Flow Meter Stainless Steel Magnetic Flowmeters MTF manufacturer from China Nanjing Metlan Measurement Control Instrument Co., Ltd

Disposal Industry Electromagnetic Flow Meter Stainless Steel Magnetic Flowmeters

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MTF

Disposal Industry Electromagnetic Flow Meter Stainless Steel Magnetic Flowmeters
</

Disposal Industry Electromagnetic Flow Meter Stainless Steel Magnetic Flowmeters

Application
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the flow
conductivity liquid, which is widely used in flow measuring of Metallurgy, Chemical

industry, Paper industry, Environmental protection, Oil industry, Textile industry, Food

industry and City administration, Water works,etc.

Instrument characteristic

1). It has lightning-protection and electricity-protection circuits. The effective,

anti-interference circuits apply to all kinds of bad environment

2). It has the function of self-adjustment and self-checking.

3). Easy for installation, 5D for front straight pipe, 2D for back straight pipe(D means inner diameter of chosen instrument)

4).High accuracy, it is up to ±0.2%,it is capable for testing

5). It provides the function of zero correction of sensor and automatic zero adjustment.

6). It has multi-language interface to satisfy all the users’ requirements.

Option of the Instrument Diameter

The diameter of the meter is not necessarily the same size as the diameter of pipe,

it should be determined by the flow rate.

Generally,the flow rate between 0.5-5m/s is called economic flow rate, and the diameter

of sensor is the same size as the diameter of pipe. Unless the medium gets a less abrasion,

and use the abrasion-resistant medium, otherwise we recommend it would not exceed 7m/s

for long-term working.

For the flow contains material of adhering, precipitating and scaling,we recommend flow

of 2m/s, preferably up to3-4m/s or more to achieve self-cleaning and prevent adhering and scaling;For those strong abrasive fluid like slurry,the common flow should be less than 3m/s

to reduce the abrasion to the lining and electrode; for the low conductive medium within

5-10μ/S,the flow of 0.5-1m/s would be better.Du to the increase of the flow rate will increase

the flow noise,the output shake will appear.

Selection of Electrode materials