Remote Type Liquid Electromagnetic Flow Meter with RS485 / HART
 
 

Main technical parameters

Ambient temperature-25---65
Ambient humidity
Medium temperature:-25--80(Note:The temperature is
different for each lining material, please advise when place
order.)
Casing protection level IP65,IP67,IP68
Flow range 0.5 --- 15m/s
Measuring diameter:DN10---DN2400
Pressure Grade:PN1.0PN1.6PN2.5PN4.0 optional
Accuracy Grade:. Grade,. Grade
Measuring Parameters:instant flow ,instant flow rate
Record parameters : Total flow accumulated, 32 group event
record
Detection and alarm parameters:Pipe empty alarm, Excitation
current detection alarm
Battery capacity detection alarm
Flow curves: Automatically show flow percentage and curves.
Scaled output signal: Unit volume flow pulse

MTF series magnetic flow meter selection table

Sensor size selection

The selection of the sensor diameter is not the same
as the diameter of pipe.This option applies to the
following:
A.for Low flow velocity in the pipe and the stable flow rate, to
meet the requirements of the instrumentation on the flow rate
range,we should increase the flow rate of partial area and
select the sensor diameter smaller than the pipe diameter ,and
install another different - diameter pipe before the sensor.
B.In terms of the price, for the magnetic flow meter with large
diameter, the larger diameter you want, you higher price you
will pay; for the low flow rate in the pipe and stable
parameter,the selection of small diameter would be better. It
will not only make the meter work in good condition but also
reduce the cost.

Warning of installing the different-diameter pipe

To avoid affecting too much the distribution of the velocity field and the measuring

accuracy, The center of the cone angle of different diameter pipe should not be

greater than 15,thus we could regard the different-diameter pipe as part of the

straight pipe.

 Mr. Miss. Angel

Tel: 86-25-53266120

Contact to this supplier