SS304 Superior Overall Performance Turbine Flow Meters For Liquid Measurement

Overview

Liquid turbine flow meter  has adopted advanced technology and obtains following characteristics: quick response, light, simple structure, high accuracy, good repeatability, and easy to
install and maintain.
Liquid turbine flow meter is widely applied to measuring liquid in sealed tube;
not corrosive with stainless steel 1Cr18Ni9Ti,2Cr13, corundum Al2O3 and
cemented carbide; with no fiber, particle or other impurity; kinematic viscosity
less than 5 × 10-6m2/s in working temperature. When the kinematic viscosity
is faster than 5 × 10-6m2/s, needs to calibrate the meter before using. Also it
can match with display instrument with special functions to realize quantitative
control, excessive alarm etc. In all, it is an ideal choice for low conductive liquid

Product features
1. High accuracy:± 1%,± 0.5%

2. Good repeatability:It can reach 0.05%~0.2% in short term

3. The sensor is in cemented carbide thrust bearing type, which can guarantee the

accuracy and improve the abrasion performance. Also it is in simple structure, solid

and easy to dismount.

7. Compact and light structure; easy to install and maintain; strong flow rate capacity

8. Superior overall performance: strong capability of anti-interference for Ultra-low

power consumption chip design and unique preamplifier filtering technology;

same precision frequency measurement; the main board full digital processing

technology; full view big liquid crystal display (LCD)

9. Double power system: 24V DC outside power supply and built in 3.6V lithium

battery; high level of integration; when needs output functions, just need to

connect to outside power supply.

Ordinary type
It has no local display and only converts the flow signal and sends out. The signal

can be divided into pulse signal and 4-20mA current signal

LWGY-N:5-24VDC power supply, the aviation plug type with 3-wire pulse output, emitter follower--the output varies with the power supply

LWGY-A: 5-24VDC power supply, ex-proof type with 3-wire pulse output, emitter follower

--the output varies with the power supply

LWGY-B:8-24V power supply, 2 or 3-wire 4-20mA output and can add 3-wire pulse outp

Warning

For your safety, review the major warnings and cautions below before operating

your equipment

          1. Use only fluids that are compatible with the housing material and wetted

components of your turbine

2. When measuring flammable liquids, observe precautions against fire or

explosion.

3. When handling hazardous liquids, always follow the liquid manufacturer’s

safety precautions

4. When working in hazardous environments, always exercise appropriate safety precautions

5. During turbine removal, liquid may spill. Follow the liquid manufacturer’s safety precautions for clean up of minor spills.

6. Do not blow compressed air through the turbine.

7. Handle the rotor carefully. Even small scratches or nicks can affect accuracy.

8. When tightening the turbine, use a wrench only on the wrench flats.

9. For best results, calibrate the meter at least 1 time per year.

Product Description

LWGY series turbine flow meters have the features: high accuracy, good repeatability,

convenient installation/maintenance, simple structure etc.…………………………………….

Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins,

an electrical signal is generated in the pickup coil. This signal is converted into engineering

units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional

accessory modules can be used to export the signal to other equipment.……………………………………..

Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a

thorough inspection. If any items are damaged or missing, contact SURE………………………

Make sure the turbine flow model meets your specific needs. For your future reference, it

might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine.………………………………………………………………………………….