Beer Electromagnetic Sanitary Flow Meter Waterproof Food Grade
 
 
Introduction:
    MTF electromagnetic flow meter, composed of sensor and converter, works based on Faraday’s law of 
electromagnetic induction. It is used to measure electrical conductivity of liquid or solid. Generally, the 
electrical conductivity should be over 5υS/cm(electrical conductivity of tap water, raw water is about 
100500υS/cm),It can also be used to measure various mediums like acid, alkali, saline solution,paper 
pulp,ore pulp and so on.But these mediums can’t contain a lot of magnetic materials and bubbles.
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the flow conductivity liquid, 
which is widely used in flow measuring of Metallurgy, Chemical industry, Paper industry, Environmental 
protection, Oil industry, Textile industry, Food industry and City administration, Water works,etc.

Instrument detection and maintenance

Electromagnetic flow converter has self-diagnosis function. In addition to the power and hardware circuit fault, The system also give alarm to other faults in general usage. These information are given accordingly prompts in the lower right of the screen.

 

Transportation, storage

a)The instrument must be packed before transportation, be carefully handled when loading and unloading.

b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the ambient temperature is not too low or too high;

c)Storage time better not exceed three years.

 

Unpacking and checking

a) The packing can’t be opened with heavy hammer, and should be careful not to damage the instrument

b) Check the content carefully according to the packing list.

 

Price of Metla

Please immediately call us to get the products price.Reducing your cost and improving your operating space is our goal and to make you redefine the quality and price.Metlan would be your honest partner.

 

 

 

 

 

MTF Electromagnetic flow meter
	Divided type	Integrated  type(IP67)	Explosion- proof  integrated	Battery powered   type	Heat(energy) type
Accuracy	±0.2%  or ±0.5%
Diameter	DN15~dn2400		DN15~DN600		DN25~DN1400
Flange	Comply with GB9119 Standard carbon steel(stainless steel is optional)
Pressure	DN15~DN1600 1.0, 1.6,2.5,4.0MPa  DN700~DN2400 0.6, 1.0,1.6MPa		DN15~DN600 1.0, 1.6,2.5,4.0MPa		DN15~DN600 1.0,1.6,2.5, 4.0MPa DN700~DN2400 0.6, 1.0,1.6MPa
	Please consult us if you need special pressure
Liner	PTFE,PU,CR,PFA,F46,IR
Conductivity	≥5μs/cm(Please consult us if it is less than ≥5μs/cm)
Electrode	316L,Hastelloy,Ti,Ta,PT-It
Protection Level	IP67(For sensor,  IP28 is  optional)	IP67	IP67	IP68	IP67  IP68
Medium Temperature	-25~180 (Please  refer to liner  material)	-25~80(Please  refer  to liner material)			-25~180 (Please refer to  liner material)
Influence of Ambient  temperature	-25~60<±0.1%/10 or<±0.25%/10
Repetition	≤±0.1%,±0.25%
Analog output Error	≤±0.02mA
Current	≤20m/s
Electrical connection	M20*1.5seal,G1/2,NPT1/2
Output interface	Standard output(4~20mA),Pulse output,RS485,HART,Profibus-PA